How to set up Conico Wireless IP Camera?

Finally, you have decided to install a video surveillance system in your house! Congrats! You do, however, have a lot of options. What is the most effective method for learning how to set up a Conico wireless IP camera?

IP cameras are rapidly being utilized as security cameras by businesses and private persons, as you may be aware. Traditional security cameras are more expensive than these.

They can also stream footage through the internet, giving them a lot more freedom in terms of where the camera may be placed. (A company might, for example, install an IP camera in a warehouse in another state and send live footage to an office in another nation.)

Unboxing of the Conico Outdoor Security Camera

Conico Wireless IP Camera

Let’s have a look at some of the specs for the Conico Wireless IP Security Camera, which may be used for home security, business security, infant care, elder care, pet care, or retail surveillance.

A few of the specs on this side. A built-in microphone and speaker are included in the audio. Thirty frames per second are the picture frame rate. The whole thing is around 32 feet long and runs on a two-point four gigahertz Wi-Fi network.

Some mounting screws, a power adapter, and a micro USB cable are included in this package, and if you’re unsatisfied with them, you may contact the manufacturer.

If you don’t already own a Conico wireless IP camera, you may get one by visiting the following link:

While the Heimvision HM243 is a brainteaser, it does have the following drawbacks:

  • No hard drive included
  • No audio recording
  • It may need to be plugged in 24/7 for continuous recording

How to Install a Conico Wireless Security Camera

1. Unpack the Conico Wireless Security Camera App and download

After you’ve unpacked the Conico Wireless Security Camera, the first thing you’ll need to do is download the Conico security camera app from the Google Play Store or the App Store. So, if you have your pack with you, all you have to do is scan the barcode and you’ll be at the Google Play or Apple shop.

2. Register or Login

If you don’t already have an account, the next step is to create one. Signing up is simple. All you need is your email address and a password that is unique to you. Click the MIPC symbol on the app to sign up or log in, then enter your email and password.

Also, before signing in, we urge that you bind your email for account security and password recovery.

3. Connect your phone to the camera

After you’ve logged in, connect your conico wireless IP camera to your phone so you can keep an eye on your property right from your phone.

To do so, go to the top left corner and press the “+” sign, then “fix camera” and scan the barcode on the camera to add it.

4. Establish a connection to your WiFi network

By selecting “Sound connection” on the app and entering your WiFi username and password, you may now connect your app to your home or office WiFi network.

5. Turn your camera on

Connecting your conico wireless security camera to a power source is the next step. After that, you’ll have to wait around 60 seconds for the camera to turn on and read. You should hear a “dripping water” sound, which indicates that your camera is now ready.

6. Attach the camera to the server

You’ll need to connect the conico wireless IP camera to the camera server to finish the setup. All you have to do is press and hold the reset button for 1 second until you hear a voice prompt that says “waiting for receiving wifi setup.”

To connect to your conico wireless security camera server, make sure your phone’s speaker is turned up high and your phone is close to the camera.

Amazing…

Ultimately, the conico wireless IP camera has been successfully installed.

Note: If your home Wi-Fi network is 2.4GHz, connect the phone to the 2.4GHz Wi-Fi network before setting up the camera; if your home Wi-Fi network is dual-band, switch off 5GHz and turn on the 2.4GHz Wi-Fi network before setting up the camera.

Seems to be Conico a wireless security camera?

Conico’s wireless IP camera is, in fact, wireless. It connects to your home network and provides you with real-time monitoring on your smartphone. You may use the app to wirelessly zoom, pan, and tilt the camera to any desired angle.

What is the procedure for resetting a Conico camera?

Simply press and hold the reset button on your Conico security camera until you hear the voice prompt “waiting for receiving wireless configuration” and your camera will be successfully reset.

How do you link your Conico Security Camera to Alexa?

By going to “settings,” “Echo Show,” you may also link your Conico security camera to Alexa. Then enable “Enable Camera Stream” and connect to Alexa by following the on-screen instructions.

Add a Comment

Your email address will not be published.