Why Is My Blink Camera Flashing Red?

Blinking lights might sometimes indicate a problem with your Blink camera. Learn about the meaning of the flashing red light and how to cure it.

This guide is for you if your Blink camera is also blinking red. We’ll go through all of the troubleshooting steps needed to fix the red light issue in different Blink camera models.

What’s the Deal With Your Blink Camera Flashing Red?

Your blink outside camera is blinking red for one of two reasons. Either your Blink camera isn’t connected to the internet or the battery in your Blink camera is dead. If your Blink Camera is blinking red, it means your internet connection isn’t working properly.

This is the major cause of the Blink Camera’s failure to record anything. As a result, it’s crucial to see if your internet is up and running. The Blink Mini’s appearance of red light indicates that it is not connected to the internet.

The red signal can also be seen during the camera setup process. The red light should be replaced with flashing green and a solid blue light after the connection is complete.

Additionally, if your blink camera battery fails, the red light may blink continually. To fix this, simply replace the batter as soon as possible.

Some of the reasons why your blink security camera is flashing red light are listed below.

The Initial Configuration Procedure

The flashing red light is most likely notifying you that the initialization and setup procedure for your Blink outdoor camera is still in progress if you haven’t yet configured it.

This flashing red light should show briefly at the start of the startup process before giving way to a blinking green light, followed by a solid blue light, signaling that everything is in working order.

Problems Accessing the Internet

A flashing red light on these outdoor cameras can also signal that the camera’s connection to your internet network has been compromised or completely broken.

It’s a good idea to double-check your camera’s connection to your Wi-Fi network if it’s blinking red wildly and you’ve previously gone through the basic setup routine (through the included smartphone application).

Fortunately, when cameras become disconnected from the mobile app, reconnecting them is a simple and straightforward process.

The batteries are deteriorating.

The LED indicators in battery-operated Blink outdoor light systems will blink red as soon as the recording light (the blue light) goes out when the batteries begin to fail.

This indicates that the batteries need to be replaced as soon as possible, otherwise you risk having a dead camera sooner than expected. You’ll be OK if you keep up with the monthly maintenance for any battery-powered Blink outdoor cameras.

There have been observed movements

Several of the Blink cameras with motion detection will flash red indicator lights when motion is detected. This is a setting that you may turn on or off regularly depending on your preferences.

Some people want it turned on so they can check to see whether the motion detection cameras are working properly. Others prefer that when used to detect motion, their camera systems go unseen, particularly at night.

How To Fix Blink Indoor, Outdoor, XT, And Blink XT2 Security Cameras From Flashing Red

 Blink Camera Flashing Red?

If your Blink Indoor, Outdoor, XT, or XT2 Camera is not recording and continues flashing the red light, follow the steps below to fix it.

Examine Your Internet Service

If your Blink Camera has been blinking read recently, it’s because your internet connection has been lost. As a result, you’ll need to connect it to a network connection so that it may be accessed easily via a mobile app.

Setup with a Red Light

When setting up a Blink security camera, it’s common to notice a red color light on the camera. This light will turn off after a while, indicating that your camera has been connected to the internet.

If the Flash camera continues to blink red, this indicates that your internet connection needs to be examined.

How to Fix a Blink Camera That Isn’t Detecting Motion

Blink Camera Not Detecting Motion is the most common cause of the red color light. As a result, you’ll need to figure out why your camera isn’t picking up motion.

Batteries must be replaced

Faulty batteries might also be the reason for your Blink Camera Flashing Red. As a consequence, try to fix the problem by replacing the batteries with new ones.

Restart Your Camera

If you’ve done everything and your Blink security camera is still not working, all you have to do now is perform a hard reset.

Are you looking for instructions on how to Reset the Blink Camera System?

Insert a thin object through the hole to press the button. Allow a few moments for the operation to complete.

When you troubleshoot a problem, you might get a variety of results. Regardless of the issue, a hard reset may be necessary at some point. Resetting the camera means restoring it to its factory settings, which were in place before any default or issue.

The reset button is usually near the USB port on the right side. The first step is to use a thin object like a paper clip to press and hold the reset button. Hold it in place until the red light flashes.

Hold the reset button down for at least 30 seconds, or until the light flashes on. As a result of this procedure, the Sync Module reboots into setup mode.

Contact Blink’s customer service

If you still have a Blink Camera Flashing Red light after following all of the above, please contact us. Blink’s customer service department may be reached by phone or email.

You’ll be connected with experts who can help you handle problems like these quickly.


No matter how much troubleshooting you try, certain Blink exterior cameras may not function as expected and may flash red lights.

In certain cases, you’ll need to do a hard reset, which entails returning the system to factory defaults and restarting it.

To reset your Blink camera, use a paperclip or a thin wire to push the little reset button on the back cover for five or six seconds. The camera will complete the rest of the reset operation.

You’ll need to re-run the initial setup method to get your Blink camera up and running, but you won’t have to worry about those flashing red lights any longer!

Add a Comment

Your email address will not be published. Required fields are marked *